Honeywell SPM Flex User Manual

16
SPM Flex Gas Detector
Menu Map
The detector’s menus are easily navigated� As an example, this is how a user
could review the detector’s gas settings when starting from the In Monitor screen:
1. Press the Up Arrow to open the Main Menu.
2. Press the Down Arrow 4 times to highlight the Review Mode option.
3. Press the Accept/Select button to enter Review Mode.
4. Press the Up Arrow or Down Arrow until the Gas settings option is highlighted.
5. Press the Accept/Select button to display the Gas Summary.
To return to the detector to the In Monitor display, press the Power/Cancel button
three times to back out of the Main Menu options�
Main Menu
Login/Logout
Reset Alarms & Faults
Reset all
Silence
audio alarm
Monitor Mode
Enter
monitor mode
Out of
monitor mode
Change Chemcassette
Review Mode
Event
History
Gas
Settings
Network
Additional
Status
Output
State
Software
Trend/Plot
Chem-
cassette
Setup
General
Monitoring Latching
Outputs Network
Configuration
Manager
Security
Power Off
Test
Optics
Verification
Simulation
Force
Relay
Force
4-20 mA
Maintenance
Inhibit
4-20 mA
Current Loop
Flow Char-
acterization
Open/Close
Gate
Update
Program
Calibration

Honeywell SPM Flex Specifications

General

Brand	Honeywell
Model	SPM Flex
Category	Security Sensors
Language	English