30
SPM Flex Gas Detector
Backward-compatible mounting bracket
Figure 21 shows the detector’s backward-compatible mounting bracket (used
when replacing an SPM detector with an SPM Flex detector)�
0.4 in. (1.1 cm)
5.4 in.
(13.7 cm)
13.0 in. (33.0 cm)
13.0 in. (32.9 cm)
Figure 21. Backward-compatible mounting bracket
Use 4 screws when mounting the backward-compatible bracket in the location of
a current SPM installation� See ”Specifications” on page 63 for a description of
appropriate screws�
To Next Page
Loading...
