29
SPM Flex Gas Detector
Standard mounting bracket
Figure 20 shows the detector’s standard mounting bracket�
Figure 20.
drilling holes:
10.2 in. (26.0 cm)
12.5 in. (31.8 cm)
6.3 in.
(15.9 cm)
0.6 in. (1.6 cm)
Standard mounting bracket
When installing the standard mounting bracket, use the bracket as a template
for determining the location of the holes to be drilled� Use 2 screws to secure
the bracket� See “Specifications” on page 63 for a description of appropriate
screws�
To Next Page
Loading...
