67
SPM Flex Gas Detector
Description Part No.
Chemcassette
cartridges
Long
--up to 90
days (XP)
or 30 days
(standard) of
continuous
monitoring
SPM Flex CC XP Hydrides 1265-3000
SPM Flex CC XP Mineral Acids (may require an export license) 1265-3001
SPM Flex CC XP Chlorine 1265-3002
SPM Flex CC XP Ammonia 1265-3003
SPM Flex CC Fluorine Oxidizers 1265-3004
SPM Flex CC Sulfur Dioxide 1265-3005
SPM Flex CC Diisocyanates 1265-3006
SPM Flex CC XP Phosgene 1265-3007
SPM Flex CC Hydrazine 1265-3008
SPM Flex CC Hydrogen Peroxide 1265-3010
SPM Flex CC Ozone 1265-3011
SPM Flex CC-U XP Mineral Acids
(No export restriction - LDL limited above 366 ppb for HF)
1265-3012
Short
--up to 2
weeks of
continuous
monitoring
SPM Flex CC-S XP Hydrides 1265-4000
SPM Flex CC-S XP Mineral Acids (may require an export license) 1265-4001
SPM Flex CC-S XP Chlorine 1265-4002
SPM Flex CC-S XP Ammonia 1265-4003
SPM Flex CC-S Fluorine Oxidizers 1265-4004
SPM Flex CC-S Sulfur Dioxide 1265-4005
SPM Flex CC-S Diisocyanates 1265-4006
SPM Flex CC-S XP Phosgene 1265-4007
SPM Flex CC-S Hydrazine 1265-4008
SPM Flex CC-S Hydrogen Cyanide 1265-4009
SPM Flex CC-S Hydrogen Peroxide 1265-4010
SPM Flex CC-S Ozone 1265-4011
SPM Flex CC-S-U XP Mineral Acids
(No export restriction - LDL limited above 366 ppb for HF)
1265-4012
1 Includes a standard wall mounting bracket, a battery, a power adaptor/charger (for indoor use only), a manual on CD, a printed quick start
guide, and a power cord appropriate for the region.
2 Includes an Ethernet connector, a power connector, a handle accessory kit, a clean-room-safe shoulder strap, a user manual on CD, a
printed quick start guide, and a power adaptor/charger with a plug and cable appropriate for the region. (The shoulder strap must be prop-
erly laundered and stored for clean room use.)
3 Use an external filter to protect the tubing from contamination (the particulate filter for non-corrosive gases, the corrosive filter for corrosive
gases). For multiple-gas applications or if the correct filter is not known, use the corrosive filter. Replace the filter every 3 months. Refer to
“Detectable Gases” on page 62 for information on specific gases. Note that filters are not used with diisocyanates, hydrazine, ozone, or
hydrogen peroxide so regular maintenance cleaning is especially important for detectors exposed to those gases.