Honeywell System 800

796689 (4188-658) i2__04/07 29
To edit a device
label
A device label is used to describe the
location of the device in the protected
premises. Each device on the loop can
have an individual 32 -character label. In the
event of a fire the device label is displayed
on the screen.
 Enter access level 2 (A2) and use the
navigation buttons to highlight and
select options:
A2
Press to change to a
required device number
Select
Press to select [Label] field
Previous Next
Press to select [Device] field
Previous Next
Next
If necessary, press
Next to move to the
next character position.
Using the numeric keypad
enter the label.
ABC
DEF
GHI JKL
MNO
PQRS
TUV
WXYZ
1 2 3
4 5 6
7 8 9
0
Edit
Press Edit button to
allow label editing.
To edit text in a field:
Each press of an alphanumeric
key will scroll character
string, eg each press of key 2 will
scroll characters: A B C 2 a b c.
Each press of key 1 will scroll
character string 1 ? , . ; & * /
Each press of key 0 will scroll
character string 0 ( ) : @ [ ]
Function
To cop y text
Highlight a label
field and press
the Function key.
Function
To paste text
Highlight a label
field and press edit key
followed by the
Function key.
1
2
3
P1
EEPROM enable
1
2
3
P1
EEPROM enable
Edit