5 – INTERACTIVE FEATURES
22 https://extranet.honeywell.com
Changing the language of the device
At startup, the device displays information in the language that has been set for
it—that is, the default language. The "Set language" function enables you to
change the current language to another of the available languages.
To change the language of the device from the language function key:
1 On the device display, select the set language function flag you need from the
toolbar.
2 Press Enter. The device displays the Change Language display for a few
seconds and then returns to the idle page with the new language set.
Figure 11 Change language display
Figure 12 Selected language display
To Next Page
Loading...
