Honeywell Tema-Voyager Compact - Performing a Transit in Semiautomatic Mode

6 – OTHER TYPES OF TRANSIT OPERATIONS
40 https://extranet.honeywell.com
Performing a transit in semiautomatic mode
The terminal may be configured to perform a transit in semiautomatic mode.
When you present your card with this configuration prior to the transit, the device
performs all configured controls and sends a transit request to the Supervision
Center. The Supervision Center can grant or deny the transit request.
No range control is performed when the device is in semiautomatic control mode.
To perform a transit in semiautomatic mode:
Present your card to the device. The device checks all the controls; when all the
controls are passed, the device sends a request to the Supervision Center, then
displays the message “Waiting for supervision reply” until you get an answer
from the Supervision Center.
The Supervision Center can accept or deny the transit. If the transit is denied, the
device:
• Refuses the card.
• Displays "Access denied".
If after a certain time there is no reply from the Supervision Center, the device:
• Refuses the card.
• Displays "Supervision reply not received".