29
ASSOCIATING ADDITIONAL DATA LISTS WITH A TRANSIT
3 The template presents a list of fields to be filled out. (Mandatory fields are
identified with an asterisk and must be filled in so that the data can be
entered.) Once an ADL is displayed, the cursor is positioned on its first field.
Use the up and down arrows to move across fields; the selected field is
highlighted with a red border.
Table 3 lists each type of field and describes how to use it.
Table 3 ADL configuration fields
Field type Field name display Procedure
Alphanumeric When you select an alphanumeric
field, the device displays a virtual
alphanumeric keyboard. Press
Enter to open the virtual keyboard
on the screen.
Use the arrows to select a key, then
press Enter to confirm the
selection. Proceed in this way for
every character you need to enter.
When you have finished composing
the entry, press on the
virtual alphanumeric keyboard,
then press Enter to insert the value
into the ADL.
Press Cancel to exit from the
virtual keyboard without saving the
input.
To delete a character to the left of
the cursor, press and then
press Enter.
Numeric For numeric fields, use the keys of
the device numeric keypad on the
device (see Figure 1) to fill the
field, then press Enter to confirm.
To Next Page
Loading...
