Connecting the Cables Page 11
When 12V of electric current is supplied (see Figure 8), the terminal
commences operation and the green “RUN” LED lights up (see Figure 7)
tamper
Ethernet 10BaseT
power supply (12V)
Status LED
Power supply
fuses
Battery fuse (F1) Battery cable
RESET button
JP4,JP3 jumpers
Ethernet (test)
JTAG
P10 wall-tamper
(jumper)
P12 connector
for production
LEAVE OPEN!
Battery
Collision (red)
RUN (green)
Plug-in Ethernet
I/O terminal box
TX (red)
RX (green)
Figure 7: Main circuit components
orange
green-yellow
Figure 8: Close-up view of the 12V supply
To Next Page
Loading...
