Honeywell TotalPlant LCN - Reference Documents; Special Installation Tools and Test Equipment

LCN System Installation 1-2 9/96
1.2
1.2 REFERENCE DOCUMENTS
The following documents are either required or will provide assistance during the
installation phase of the TPS Local Control Network System equipment.
Title Binder
Application Module
X
Service Application Module
X
BASIC System Installation (Section 25-110) BASIC System Summary
Data Hiway Planning System Site Planning - 2
Data Hiway Subsystem Site Planning BASIC System Summary
Dual Node Module Service LCN Service - 2
Engineer's Reference Manual Implementation/Startup & Reconfiguration - 2
Five/Ten-Slot Module Service LCN Service - 2
History Module Service LCN Service - 2
LCN Guidelines - Implementation,
Troubleshooting, and Service
LCN Installation
LCN Planning System Site Planning - 1
LCN System Checkout LCN Installation
Logic Manager Installation Implementation/Logic Manager
Logic Manager Planning System Site Planning - 2
PM and APM Planning System Site Planning - 1
Process Manager Installation Implementation/Process Manager - 1
TPS System Site Planning System Site Planning - 1
UCN Guidelines UCN Installation
Universal Station (Ergonomic)Service LCN Service - 1
Universal Station Service LCN Service - 1
Universal Station
X
(Ergonomic) Service Universal Station
X
Universal Station
X
Service Universal Station
X
Deskside Global User Station Service Global User Station
Console Global User Station Service Global User Station
Classic Console Global User Station Service Global User Station
1.3 SPECIAL INSTALLATION TOOLS AND TEST EQUIPMENT
• Mobile lifter and/or lift truck.
• Set of standard technician's hand tools, including multimeter.