LCN System Installation A-6 9/96
A.6
A.6 ENHANCED UNIVERSAL WORK STATION (EUWS)
INSTALLATION
The EUWS consists of a 5-slot LCN module with optional media storage devices (either
dual floppy-disk drives or dual high-capacity cartridge drives), all of which are mounted in
a free-standing enclosure, see Figure A-6 and A-7. Peripherals supplied are a 14" CRT
color monitor, either an engineering keyboard or a supervisory keyboard, or both, a mouse
for cursor control and an optional printer.
The power cable, peripheral cables, and LCN cables enter and exit through the rear panel.
Access to the 5-slot module cards is through the front cover and access to the I/O cards is
through the rear. Some details of I/O cabling are shown in Figures A-5, A-6, and A-7.
See Section 8 for address pinning.
For complete installation and operating details, see the Enhanced Universal Work Station
Installation, Operation, and Service manual packed with the equipment.
Rear View of Cabinet
Printe
Cable
Cable
Clamps
LCN Cables
LCN Cable Tee
Operator Keyboard
Cable
Monitor Cable
1
2
3
5
Inside View of Rear Cover
51134
Figure A-5 — Cable Routing at Rear of Enhanced Universal Work Station
To Next Page
Loading...
