LCN System Installation C-8 9/96
C.6 Micro TDC 3000 Cabling
Scope
Cabling for a Micro TDC 3000 is shown in the following figure and table.
The number in the circles refers to the line item in the table below.
Figure C-8 Micro TDC 3000 Cabling—Standard
53418
Engineering
Keyboard
Enclosure
Operator Keyboard
Monitor
Printer
Cartridge Drive 0
EPDGC I/O
1
4
5
2
7
6
Touchscreen
Power Supply
or Five-slot
Module J8
8
9
Cartridge Drive 1
10
11
Control
3
Keyboard
SCSI
Printer
Cursor
Video
Table C-7 Micro TDC 3000 Cabling—Standard (Trackball)
Ref. # Part Number Application Notes
1 51192126-200 Video Cable
2 51308099-100 Mouse/Trackball Interface Cable
3 Not Applicable
4 51308103-003 Printer Cable – 3 meters/9.8 ft.
51308103-008 Printer Cable – 8 meters/26.3 ft.
51308103-015 Printer Cable – 15 meters/49.2 ft.
5 51192054-101 Cable, SCSI Shielded, 50 position
6 51305070-200 Cable, SCSI
7 51308110-100 Cartridge DC Power Cable
8 51308109-100 Cartridge DC Power Cable (in enclosure)
9 51308105-200 Keyboard Interface Cable
10 51308104-100 Keyboard Interface Cable (in keyboard tray)
11 51304496-046 Engineer’s Keyboard Cable (in keyboard tray)
Continued on next page
To Next Page
Loading...
