LCN System Installation C-9 9/96
C.6 Micro TDC 3000 Cabling, Continued
Touchscreen option
Cabling for a Micro TDC 3000 is shown in the following figure and table.
If the touchscreen special has been installed, the following figure and table
represents the cabling. The number in the circles refers to the line item in
the table below.
Figure C-9 Micro TDC 3000 Cabling—Touchscreen
53418
Engineering
Keyboard
Enclosure
Operator Keyboard
Monitor
Printer
Cartridge Drive 0
EPDGC I/O
Video
Cursor
Printer
SCSI
Keyboard
1
4
5
2
7
6
Touch Screen
Power Supply
or Five-slot
Module J8
8
9
Cartridge Drive 1
10
11
Control
3
Table C-8 Micro TDC 3000 Cabling—Touchscreen
Ref. # Part Number Application Notes
1 51192126-200 Video Cable
2 51308097-100 Touchscreen Interface Cable
3 51308114-100 Touchscreen Interface Cable
4 51308103-003 Printer Cable – 3 meters/9.8 ft.
51308103-008 Printer Cable – 8 meters/26.3 ft.
51308103-015 Printer Cable – 15 meters/49.2 ft.
5 51192054-101 Cable, SCSI Shielded, 50 position
6 51305070-200 Cable, SCSI
7 51308110-100 Cartridge Drive Power Cable
8 51308109-100 Cartridge Drive Power Cable (in enclosure)
9 51308105-200 Keyboard Interconnecting Cable
10 51308104-100 Keyboard Interface Cable (in keyboard tray)
11 51304496-046 Engineer’s Keyboard Cable (in keyboard tray)
To Next Page
Loading...
