Honeywell VA201T - Bump Test;Calibration Setup

Calibration Handbook
100 Midas
Bump Test/Calibration Setup
Option 1
Option 2
1. Fill ½ gas bag with humidified sample gas
2. Remove bubbler and fill remainder of gas bag with dry sample gas
3. Enter “Bump Test” or “Calibration” menu
4. Attach Midas inlet port to gas bag
1 LPM
Regulator
Sample Gas
Sample Gas
1 LPM
Regulator
Sample Gas
Sample Gas
Step 1 Step 2 Step 4