Honeywell VOYAGER 1250G User Manual

3
Scanner-Bioptic Packet Mode............................. 2-28
ACK/NAK............................................................. 2-28
Communication Timeout ..................................... 2-28
Chapter 3 - Input/Output Settings
Power Up Beeper........................................................ 3-1
Beep on BEL Character .............................................. 3-1
Good Read and Error Indicators ................................. 3-2
Beeper – Good Read ............................................ 3-2
Beeper Volume – Good Read ............................... 3-2
Beeper Pitch – Good Read ................................... 3-3
Beeper - Transmit Order ....................................... 3-3
Beeper Pitch – Error.............................................. 3-3
Beeper Duration – Good Read.............................. 3-4
Number of Beeps – Good Read............................ 3-4
Number of Beeps – Error ...................................... 3-4
LED Indicators............................................................. 3-6
LED Settings ......................................................... 3-6
LED Brightness ..................................................... 3-7
In-Stand and Out-Of-Stand Settings ........................... 3-7
In-Stand and Out-of-Stand Defaults...................... 3-8
Presentation Modes .............................................. 3-8
Manual Activation Mode........................................ 3-9
End Manual Activation After Good Read............... 3-9
Manual Activation Laser Timeout -
Button Settings............................................... 3-10
CodeGate
®
.......................................................... 3-11
Object Detection Mode........................................ 3-11
End Object Detection After Good Read .............. 3-12
Object Detection Laser Timeout.......................... 3-12
Object Detection Distance................................... 3-13
Character Activation Mode........................................ 3-13
Activation Character............................................ 3-13
End Character Activation After Good Read......... 3-14
Character Activation Laser Timeout.................... 3-14
Character Deactivation Mode.................................... 3-15

Honeywell VOYAGER 1250G Specifications

General

Sensor type	Laser
Scanner type	1D
Tilt angle range	-30 - 30 °
Decoding standards	1D, GS1
Pitch reading angle	-60 - 60 °
Light levels (direct sunlight)	0 - 75000 lx
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	140 mA
Shockproof	Yes
Dimensions (WxDxH)	168 x 60 x 74 mm
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	133 g