Honeywell VOYAGER 1250G User Manual

4
Deactivation Character ........................................3-15
Reread Delay.............................................................3-16
User-Specified Reread Delay ....................................3-16
Output Sequence Overview.......................................3-16
Require Output Sequence ...................................3-16
Output Sequence Editor ......................................3-17
To Add an Output Sequence ...............................3-17
Other Programming Selections............................3-17
Output Sequence Editor ......................................3-19
Sequence Timeout...............................................3-19
Sequence Match Beeper .....................................3-20
Partial Sequence .................................................3-20
Require Output Sequence ...................................3-20
No Read.....................................................................3-21
Chapter 4 - Data Editing
Prefix/Suffix Overview..................................................4-1
To Add a Prefix or Suffix:.......................................4-1
To Clear One or All Prefixes or Suffixes ................4-2
To Add a Carriage Return Suffix to
All Symbologies................................................4-3
Prefix Selections..........................................................4-3
Suffix Selections ..........................................................4-4
Transmit Alternate Extended ASCII Characters ..........4-4
Function Code Transmit ..............................................4-6
Communication Check Character................................4-6
Intercharacter, Interfunction, and
Intermessage Delays.................................................4-7
Intercharacter Delay ..............................................4-7
User Specified Intercharacter Delay ......................4-7
Interfunction Delay.................................................4-8
Intermessage Delay...............................................4-9
Chapter 5 - Data Formatting
Data Format Editor Introduction...................................5-1
To Add a Data Format .................................................5-1

Honeywell VOYAGER 1250G Specifications

General

Sensor type	Laser
Scanner type	1D
Tilt angle range	-30 - 30 °
Decoding standards	1D, GS1
Pitch reading angle	-60 - 60 °
Light levels (direct sunlight)	0 - 75000 lx
Standard interfaces	USB, RS-232
Input voltage	5 V
Power consumption	140 mA
Shockproof	Yes
Dimensions (WxDxH)	168 x 60 x 74 mm
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	133 g