Honeywell Xenon 1910 - Page 223

12 - 25
Postal Codes - Linear
China Post (Hong Kong 2 of 5) Default All China Post (Hong Kong
2 of 5) Settings
CPCDFT 8-48
*Off CPCENA0 8-48
On CPCENA1 8-48
China Post (Hong Kong 2 of 5) Msg.
Length
Minimum (2 - 80) *4 CPCMIN## 8-48
Maximum (2 - 80) *80 CPCMAX## 8-48
Korea Post Default All Korea Post Settings KPCDFT 8-49
*Off KPCENA0 8-49
On KPCENA1 8-49
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 8-49
Maximum (2 - 80) *48 KPCMAX## 8-49
Korea Post Check Digit Transmit Check Digit KPCCHK1 8-49
*Don’t Transmit Check Digit KPCCHK0 8-49
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT 9-1
Imaging Style - Decoding SNPSTY0 9-1
*Imaging Style - Photo SNPSTY1 9-1
Imaging Style - Manual SNPSTY2 9-1
Beeper On SNPBEP1 9-1
*Beeper Off SNPBEP0 9-1
*Wait for Trigger Off SNPTRG0 9-2
Wait for Trigger On SNPTRG1 9-2
*LED State - Off SNPLED0 9-2
LED State - On SNPLED1 9-2
Exposure (1-7874 microseconds) SNPEXP 9-2
*Gain - None SNPGAN1 9-2
Gain - Medium SNPGAN2 9-2
Gain - Heavy SNPGAN4 9-2
Gain - Maximum SNPGAN8 9-2
Target White Value (0-255) *125 SNPWHT### 9-3
Delta for Acceptance (0-255) *25 SNPDEL### 9-3
Update Tries (0-10) *6 SNPTRY## 9-3
Target Set Point Percentage (1-99)
*50
SNPPCT## 9-3
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page