HORI APEX - How to Set up; Steering Unit - Clamp

p.49
󴂸󳷥
How to Set Up
1
Put the screw through the clamp.
Clamp
Screw
Steering Unit
2
Put the clamp through the hole on the bottom of the steering unit.
Rotate the screw clockwise to secure temporarily.
1
Steering Unit- Clamp
Please read before setup
Tighten the clamp into the steering unit base with the screw.
Carefully detach from furniture to prevent damage to furniture or product.
When using this product, use either a clamp or suction cups. Combined use can deform their shape.
󾙘󾙖󾙗
󾙒󾙕󾙓󾙚
󾙘󾙖󾙗
󾙒󾙕󾙓󾙚
󾙓󾙗󾙒󾙗󾙛
Flat, hard surface required (i.e., table)


Thin or soft Fragile (i.e., glass)
Uneven Too thick Shallow clamp grip
󾙛󾙒󾙕󾙗󾙛󾙒󾙕󾙗
7 / 20
     