HORI APEX - Adjustable Dead Zone

p.55
󴂸󳷥
Adjustable Dead Zone
The dead zone play of centered wheel is adjustable to seven levels. LED (L) color will change to indicate
the dead zone value.
1 2 3 5 6Dead zone value
LED color
4 7
Green Yellow Red Blue Light BluePurple White
Narrow WideDefault
If you do not perform step  after  , the LED (R) will turn off after four seconds and Adjustable Dead Zone setting mode
will automatically end.
Controller settings are stored even if the PlayStation®5 console console, PlayStation®4 console,
or PC is turned off or the receiver is disconnected.
Operation LED Status Setting Status


LED (R) will flash slowly.
LED (R) will flash quickly.
Dead zone value increases
by pressing up on the
Directional buttons.
Dead zone value decreases
by pressing down on the
Directional buttons.


LED (L) color will change
according to setting and
chart above.
Set Directional buttons
Toggle Switch to DP
Dead zone value increases
Dead zone value decreases
Hold ASSIGN button for 3 seconds
Press , (options) button
Button inputs are disabled
during setting.
Start setting
Finish setting

Press ASSIGN button
LED (L) color will change to white.
LED (R) will turn off.
・The LED (R) will light green
when assigning buttons.
13 / 20
     