SAFE Select Switch Designation
Once SAFE Select is enabled, you can choose to fly in SAFE mode full-time, or assign a switch. Any switch on any
channel between 5 and 9 can be used on your transmitter.
If the aircraft is bound with SAFE Select disabled, the aircraft will be in AS3X mode exclusively.
CAUTION: Keep all body parts well clear of the propeller and keep the aircraft securely restrained in case of
accidental throttle activation.
IMPORTANT: To be able to assign a switch, first verify:
The aircraft was bound with SAFE Select enabled.
Your choice for the SAFE Select switch is assigned to a channel between 5 and 9 (Gear, Aux1-4), and travel is
set at 100% in each direction.
The aileron, elevator, rudder and throttle direction are set to normal, not reverse.
The aileron, elevator, rudder and throttle are set to 100% travel. If dual rates are in use, the switches need to be
in the 100% position.
See your transmitter manual for more information about assigning a switch to a channel.
To Next Page
Loading...
