HORNER XL4 - Page 58

MAN0964-14-EN_XL4_XL4P_UM
N o v e m b e r 1 0 , 2 0 2 1 P a g e 58 | 194
For additional information on system bits and registers, refer to the Online Help found in
Cscape.
NOTE: Not every OCS controls every %SR.
Table 6.2 – %SR Registers – Master %SR Table
Register
Default I/O
Name
Description
Min-Max
Values
Program
(Read/Write)
Display
(Read/Write)
%SR210
Time Zone: set in minutes + / - UTC.
(Ex: EST is -4 hours = -240 minutes)
Read/Write
Read/Write
%SR211
Daylight Saving: YES = 1
Daylight Saving: NO = 0
(If daylight saving is enabled, one hour
will be added to the local time).
Read/Write
Read/Write
%SR212
UTC – Seconds
Read Only
Read Only
%SR213
UTC – Minutes
Read Only
Read Only
%SR214
UTC – Hours
Read Only
Read Only
%SR215
UTC – Date
Read Only
Read Only
%SR216
UTC – Month
Read Only
Read Only
%SR217
UTC – Year
Read Only
Read Only
%SR218
Number of Webpages, license detail
(XLE/XLT, X2, X4, & X7 use %SR101 &
%SR108-112 for WebMI License Details.)
Read Only
Read Only
%SR219
Number of Data Points, license detail.
(XLE/XLT, X2, X4, & X7 use %SR101 &
%SR108-112 for WebMI License Details)
Read Only
Read Only
%SR220-222
Expiration Date of WebMI License,
license detail.
(XLE/XLT, X2, X4, & X7 use %SR101 &
%SR108-112 for WebMI License Details)
Read Only
Read Only