Operation
Whenever working on the machine
pay attention to the associated safety
notes in the chapter “Safety and
prevention of accidents” as well as
the accident prevention instructions!
Commissioning /
Tractor change
During initial commissioning and when chang-
ing the tractor, the machine must be adapted
to the tractor.
WARNING
Dropping or lowering machine parts can cause
severe crushing injuries etc.!
¾ Instruct persons to leave the danger zone.
¾ Comply with the accident prevention instruc-
tions.
Commissioning /
Tractor change
During initial commissioning and when chang-
ing the tractor, the machine must be adapted
to the tractor.
Adapting the hose connection
Hose brackets and hose lengths must be adapt-
ed to the tractor or the seed wagon.
The bracket must be adjusted in such a way, that
hoses and couplings will not be damaged under
any operating conditions in the eld, in transport
position and when cornering.
Adjust the free length of the hoses to the tractor
or seed wagon.
¾ Loosen the clamping brackets (a) and move
the hoses.
¾ Allow for a loop (b) to enable cornering.
¾ Fasten the clamping brackets again.
b
a
Adapting the hose bracket
Connecting / Parking
DANGER
Serious accidents when manoeuvring and
coupling!
¾ Keep an eye on your environment.
¾ Keep persons (children) out of the manoeu-
vring range of the machine.
¾ Instruct persons to leave the area between
tractor and machine.
¾ No person must be present in the danger zone
when the tractor approaches the machine or
moves away from it!
¾ Trigger movements of the three-point power
jack only from outside the danger zone.
WARNING
Leaking hydraulic uid can cause serious in-
juries! Danger of injury by unwanted machine
movements.
¾ Connect and disconnect the hydraulic lines
only when the hydraulics are without pressure
on both tractor and machine.
28
To Next Page
Loading...
