Parking
The machine can be parked temporarily in folded
condition.
DANGER
Serious accidents from loss of stability!
¾ Park the machine only on a at, paved sur-
face.
¾ Park the machine only with empty hopper.
NOTE
Parking for an extended period:
¾ Park the machine unfolded in a hall or under
a roof. This prevents a permanent load on the
undercarriage wheels.
¾ Thoroughly clean the machine and hopper if
solid fertiliser was placed.
Fertiliser is aggressive and speeds up the
corrosion process. It especially attacks gal-
vanised components like bolts.
¾ Clean the machine and prepare it accordingly,
see chapter Care and maintenance.
¾ Store the terminal in dry conditions.
The machine can be parked together with the
seed wagon or without the seed wagon.
Unhitching the machine from the tractor
1. Position the machine at a suitable location
and set the tractor brake.
2. Mount the support and secure it with bolt and
cotter pin:
3. Adjust the height of the drawbar by cranking
on the support and remove the bolt on the
drawbar eye.
4. Depressurise the hydraulic lines and discon-
nect them.
5. Park with the seed wagon connected at the
rear:
- Empty the seed hopper.
- Lock the seed hopper cover.
- Clean the metering units.
- Fold down the support on the seed wagon
and secure it.
- Crank down the support to relieve the
machine.
32
To Next Page
Loading...
