Transport position
WARNING
Danger of road accidents caused by losing the
machine or machine parts.
Before driving o:
¾ Clean all thrown up soil o the entire machine.
¾ Check function of lighting system.
¾ Lock the control units mechanically or electri-
cally, depending on the version, during trans-
port travel. Never switch them to the oating
position.
¾ Check all interlocks before starting to drive.
¾ Release the parking brake and check the
service brake (option).
¾ Check whether all securing elements of the
connection are in place and set correctly.
¾ Check components of the connection for wear.
¾ In regard to the drawbar eye or ball and
socket coupling connection, follow the notes
in the Maintenance overview chapter.
NOTE
¾ Make sure before driving on public roads that
the machine meets all respective applicable
national road trac regulations.
Make the following additional adjustments after
connecting:
1. Fold the machine in completely, see section
Folding in.
2. Switch o the E-Manager.
3. Check before starting to drive whether the
machine has been properly connected and
secured.
Position
Control unit
Floating position Locked position Supply
Folding
Lift/lower cutting discs and
coulter
Fan
Position of control units during road travel
31
To Next Page
Loading...
