horsch Sprinter 18 NT - Distributor

Distributor
Depending on the working width, the distributors
are 󰘰tted with a di󰘯erent number of seed and
fertiliser hoses.
Distributor
Maintenance and inspections
¾ Check the distributor regularly for foreign
objects or blockage. Unscrew the distributor
cover and check the outlets.
¾ Check all components regularly for leak tight-
ness.
¾ Check the correct order of the seed 󰘱ow sen-
sors.
¾ Note the correct hose arrangement, see ap-
pendix.
Seed ow control (option)
The seed hoses can be monitored with the seed
󰘱ow sensors.
The sensors are connected in series, and the
numbers indicate the order.
In case of an alarm, these sensor numbers help
when troubleshooting the hoses.
36