Hoshizaki MODULAR CUBELET SERENITY SERIES FS-1022MLH-C - Page 50

50
11) Remove the gear motor bracket and spline coupling from the old gear motor and place
on the new gear motor.
12) Install the new gear motor and reconnect the electrical wires.
13) Replace the removed parts in the reverse order of which they were removed.
14) Replace the top and side panels in their correct positions.
15)Movethecontrolswitchtothe"ICE"position.
16)Plugtheunitintotheelectricaloutlet,thenmovethepowerswitchtothe"ON"position
to start the automatic icemaking process.
17) Replace the front panel in its correct position.