Hoshizaki MODULAR CUBELET SERENITY SERIES FS-1022MLH-C User Manual

55
4) Pour the sanitizing solution over the extruding head until the evaporator assembly and
thereservoirarefullandthesolutionstartstooverowintothedrainpan.
5) Replace the spout and strap in their correct positions.
6) Allow the icemaker to sit for about 10 minutes before operation.
7)Replacethetoppanelinitscorrectposition.Movethecontrolswitchtothe"ICE"
position,thenplugtheunitbackin.Movethepowerswitchtothe"ON"position,then
replace the front panel in its correct position. Make ice using the solution until the
icemaker stops making ice.
8)Removethefrontpanel,thenmovethepowerswitchtothe"OFF"position.Movethe
controlswitchtothe"DRAIN"position,thenmovethepowerswitchbacktothe"ON"
position. Replace the front panel in its correct position.
9) Allow the water system to drain for 5 minutes.
10)Removethefrontpanel.Movethecontrolswitchtothe"ICE"position,thenreplacethe
front panel in its correct position.
11) Open the water supply line shut-off valve to supply water to the reservoir.
12)Afterthegearmotorstarts,removethefrontpanel.Movethepowerswitchtothe"OFF"
position.Movethecontrolswitchtothe"DRAIN"position,thenmovethepowerswitch
backtothe"ON"position.Replacethefrontpanelinitscorrectposition.
13) Allow the water system to drain for 5 minutes.
14)Removethefrontpanel.Movethecontrolswitchtothe"ICE"position,thenreplacethe
front panel in its correct position.
15) Allow the icemaker to run for about 30 minutes, then remove the front panel. Move the
powerswitchtothe"OFF"position,thenunplugtheunitfromtheelectricaloutlet.
16) Pour warm water into the dispenser unit/storage bin and melt any remaining ice. Clean
the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly after
cleaning.
17)Plugtheunitbackin.Makesurethecontrolswitchisinthe"ICE"position,thenmove
thepowerswitchtothe"ON"positiontostarttheautomaticicemakingprocess.
B. Maintenance
This icemaker must be maintained individually, referring to the instruction manual and
labels provided with the icemaker. The schedule below is a guideline. More frequent
maintenance,however,mayberequireddependingonwaterquality,theicemaker's
environment, and local sanitation regulations.
Consult with your local distributor about inspection and maintenance service. To obtain
the name and phone number of your local distributor, visit www.hoshizaki.com or call
Hoshizaki Technical Support at 1-800-233-1940 in the USA.
WARNING
1. Only qualied service technicians should attempt to service this icemaker.
2.Movethepowerswitchtothe"OFF"positionandunplugtheunitfromthe
electrical outlet before servicing.

Hoshizaki MODULAR CUBELET SERENITY SERIES FS-1022MLH-C Specifications

General

Brand	Hoshizaki
Model	MODULAR CUBELET SERENITY SERIES FS-1022MLH-C
Category	Ice Maker
Language	English