What causes skin irritation or rash from my HotSpring Limelight Hot Tub?
Skin irritation or rash from your HotSpring Hot Tub can be caused by unsanitary water or a free chlorine level above 5 ppm. Shock the spa with sanitizer and maintain the sanitizer level, and allow the free chlorine level to drop below 5 ppm before using the spa.
What causes stains in my HotSpring Limelight?
Stains in your HotSpring Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH, and use a metal deposit inhibitor.
What causes a musty odor in my HotSpring Limelight?
A musty odor in your HotSpring Hot Tub is usually caused by bacteria or algae growth. Shock the spa with sanitizer. If the problem is visible or persistent, drain, clean, and refill the spa.
How to remove organic buildup or scum ring from my HotSpring Hot Tub?
Organic buildup or a scum ring around your HotSpring Hot Tub is caused by a build-up of oils and dirt. Wipe off the scum with a clean rag. If it's severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and refill the spa.
Instructions for safe spa operation, emphasizing child safety and electrical hazards.
Precautions to prevent child drowning and injury, including supervision and water temperature.
Warnings and instructions regarding electrical safety, grounding, and cord connection.
Detailed warnings about electrical shock hazards, installation distances, and appliance proximity.
Information on avoiding injury from suction, slipping, and health conditions affected by spa use.
Warnings about hyperthermia from prolonged immersion in hot water, especially with alcohol or drugs.
Recommendations for safe water temperatures and avoiding strenuous exercise before spa use.
Guidelines for choosing a spa location, ensuring a level surface and proper drainage for the equipment.
Requirements for outdoor installation, including concrete pads and foundation support.
Considerations for deck installation, emphasizing load capacity and consulting professionals.
Special requirements for indoor installation, focusing on flooring, drainage, and ventilation.
Detailed steps and considerations for leveling the spa to ensure proper operation and drainage.
Electrical requirements and installation instructions for 230V models.
Wiring diagram illustrating connections for 230V models to the control box.
Specific electrical requirements for converting the Gleam model to 230V.
Wiring illustration and cautions for the 230V converted Gleam model.
Information on converting the Bolt model between 115V and 230V operation.
Instructions for testing and using the 115V GFCI for safety.
Requirements for dedicated 115V operation, including GFCI breaker and wiring.
Warnings against using extension cords and instructions for grounding.
Specific installation steps for the 115V Bolt model, including GFCI testing.
Step-by-step instructions for converting the Bolt model to 230V operation.
Instructions for wiring the converted Bolt model, including GFCI testing and wire types.
Essential steps for filling the spa, priming the system, and initial operation.
Critical warnings regarding filling, power connection, and chemical additions before operation.
Overview of the spa's control panel, buttons, display, and indicator lights.
Explanation of control panel buttons, display icons, and their functions.
How to operate the jets using the JETS button on specific models.
Operation of jet pumps 1, 2, 3, and ALLJT for the Gleam model via the JETS button.
Overview of the main control panel menus (Temperature, System, Clean, Tools).
How to set, adjust, and lock the spa water temperature.
Explanation of SPA LOCK and TEMPERATURE LOCK features.
How to activate and deactivate the TEMPERATURE LOCK feature.
Essential safety guidelines for handling and using spa chemicals.
Troubleshooting steps for GFCI trips and high limit thermostat issues.
Conditions and actions that will void the spa's limited warranty.
A guide to diagnosing and solving common operational problems with the spa.
Troubleshooting guide for common spa water quality issues like cloudy water and odors.
To Next Page
General