Hoymiles HMT-2250-6T User Manual

About Microinverter
This system is composed of a group of Three-Phase Microinverters that convert direct current (DC) into
alternating current (AC) and feeds it into the public grid. The system is designed for the incorporation of one
Microinverter for six photovoltaic modules.
Each Microinverter works independently that guarantees the maximum power generation of each photovoltaic
module. This setup enables user to control the production of a single photovoltaic module directly, consequently
improving the exibility and reliability of the system.
About the Manual
This manual contains important instructions for the HMT-1800/HMT-2250 Microinverter and must be read in
its entirety before installing or commissioning the equipment.
For safety, only qualied technician, who has received training or has demonstrated skills can install and
maintain this Microinverter under the guide of this document.
Other Information
Product information is subject to change without notice. User manual will be updated frequently, please refer to
Hoymiles ofcial website at www.hoymiles.com for the latest version.
© 2020 Hoymiles Power Electronics Inc. All rights reserved.
01
Three-phase Microinverter HMT-1800/2250

Hoymiles HMT-2250-6T Specifications

General

Model	HMT-2250-6T
Category	Inverter
Max. Output Power	2250 W
Number of MPPTs	6
Efficiency	96.5%
Peak Power Tracking Voltage Range	16-60 V
Startup Voltage	22 V
Rated Output Power	2250 W
Rated Output Current	9.78A
Nominal Output Voltage/Range	230 V
Rated Output Voltage	230 V
Output Frequency	50/60 Hz
Cooling Method	Natural Convection
Protection Level	IP67
Maximum Input Current	12A
Ambient Temperature Range	-40°C to +60°C
Operating Temperature Range	-40°C to +60°C