HP 1650B User Manual

TYPE
command/query
The TYPE command specifies what type a specified analyzer (machine)
will be. The analyzer types are state or timing. The TYPE command also
allows you to turn off a particular machine.
,’ Only one of the two analyzers can be specified as a timing analyzer at one
Note @ time.
The TYPE query returns the current analyzer type for the specified
analyzer.
Command Syntax:
:MACHine{l 12):TYPE <analyzertype>
where:
c analyzer type > :: = {OFF 1 STATe 1 TIMing}
Example: OUTPUT XXX;" : MACH1 NE1 : TYPE STATE”
Query Syntax:
:MACHine{ 1 IP):TYPE?
Returned Format:
[:MACHine{l IP):NPE] <analyzertype> cNL>
Example: 10 DIM String$ [loo]
20 OUTPUT XXX;“:MACHINEl:TYPE?”
30 ENTER XXX;String$
40 PRINT String$
50 END
MACHine Subsystem
lo-8
HP 1850B/HP 18818
Programming Reference

HP 1650B Specifications

General

Brand	HP
Model	1650B
Category	Measuring Instruments
Language	English