OCONdition
OCONdition
command/query
The OCONdition command specifies where the 0 marker is placed. The
0 marker can be placed on the entry or exit point of the
OPATtern
when
in the
PAlTern
marker mode.
The OCONdition query returns the current setting.
Command Syntax:
:MACHine{
1
12):TWAVeform:OCONdition {ENTering
1
EXITing}
Example:
OUTPUT XXX; ":MACHINE1:TWAVEFORM:OCONOITION ENTERING"
Query Syntax:
:MACHine{l
12}:TWAVeform:OCONdition?
Returned Format:
[:MACHine{
1
12}:TWAVeform:OCONdition]
{ENTaring
1
EXITing}
c
NL>
Example:
10 DIM
ocs
[loo]
20 OUTPUT XXX;":MACHINE1:TWAVEFORM:OCONDITION?"
30 ENTER XXX; Oc$
40 PRINT Oc$
50 END
WAVeform
Subsystem
19-10
HP 1650WHP 1651B
Programming Reference
To Next Page
Loading...
