HP 1810-24G Installation And Getting Started Guide

2-6
Installing the Switch
Installation Procedure
Note The 1810-24 and 1810-24G Switches do not have a power switch. They are
powered on when the power cord is connected to the switch and to a power
source. For safety, the power outlet should be located near the switch
installation.
Connect the power cord to the switch
and an AC power outlet
1810-8 and 1810-8G Switch
1810-24 and 1810-24G Switch
Connect inline AC/DC power adapter to
the switch and an AC power outlet
Connect wall plug-in AC/DC power adapter
to the switch and an AC power outlet

HP 1810-24G Specifications

General

Switching Capacity	52 Gbps
Throughput	38.7 Mpps
Form Factor	Rack-mountable
Management	Web-based GUI
Power Supply	Internal
Layer	Layer 2
Operating Temperature	0°C to 40°C (32°F to 104°F)
Ports	24 RJ-45 10/100/1000 ports
Weight	2.27 kg (5.0 lb)
Operating Humidity	10% to 90% non-condensing