HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter User Manual

HP StorageWorks 1000 Modular Smart Array installation guide 19
HP Storage Management Initiative
Specification provider for the MSA
h t t p : / / h 18 0 07. w w w 1. h p . c o m /
support/files/storage/us/
download/23385.html
Provides the Web-based management interface for the management of the
MSA, in compliance with the SMI-S standard.
This MSA-specific SMI-S provider can be installed on Microsoft Windows
2000 or Windows 2003 Server hosts with access to the MSA.
For more information about HP and SMI-S, go to the HP Storage
Management Initiative Specification website:
http://h18006.www1.hp.com/storage/smis.html
For general information about SMI-S clients and providers, go to the
following websites:
• Storage Networking Industry Association (SNIA):
http://www.snia.org/home
• Storage Networking Industry Association (SNIA) listings of HP SMI-S
providers: http://www.snia.org/ctp/smi_conform
HP Secure Path
http://www.hp.com/go/securepath
Multipathing software for Windows, Linux, NetWare, and HP-UX
(active/passive environments only)
Used in multipathing environments running active/passive array controller
firmware, Secure Path manages, monitors, and maintains data paths
between server and storage. If a path failure is detected, traffic fails over to
an alternative path.
Special Secure Path versions are available for Windows, Linux, and
NetWare MSA
1000-only and MSA150 0 -only environments. If your SAN
environment includes only MSA controllers running active/passive
firmware versions 4.x or 5.x, consider using a “Workgroup Edition” of
Secure Path.
HP MPIO Full Featured Failover and
Manager
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
Multipathing software for Windows (active/active environments only)
Used in multipathing environments running active/active array controller
firmware, HP MPIO Full Featured Failover and Manager manages,
monitors, and maintains data paths between server and storage. If a path
failure is detected, traffic fails over to an alternative path.
Other multipath software already present on the host may not be
compatible with HP Full Featured MPIO. See the MSA
1000 compatibility
guide for details.
The HP full-featured MPIO is provided on the MSA Support Software CD.
HP MPIO Basic Failover
http://h18006.www1.hp.com/
products/sanworks/
multipathoptions/index.html
Multipathing software for Windows (active/passive environments only)
Used in multipathing environments running active/passive array controller
firmware, HP MPIO Basic Failover provides basic path failover and path
recovery.
Other multipath software already present on the host may not be
compatible with HP Basic MPIO. See the MSA
1000 compatibility guide
for details.
Table 3 MSA1000 and SAN-related websites (continued)
Website Content

HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Specifications

General

Brand	HP
Model	353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter
Category	Disk array system
Language	English