HP 39gs - Plot-view variables

18-32 Programming
Plot-view variables
Area
Function
Contains the last value found by the Area function in Plot-
FCN menu.
Axes
All Aplets
Turns axes on or off.
From Plot Setup, check (or uncheck) AXES.
or
In a program, type:
1
 Axes—to turn axes on (default).
0  Axes—to turn axes off.
Connect
Function
Parametric
Polar
Solve
Statistics
Draws lines between successively plotted points.
From Plot Setup, check (or uncheck)
CONNECT.
or
In a program, type
1
 Connect—to connect plotted points (default,
except in Statistics where the default is off).
0  Connect—not to connect plotted points.
Coord
Function
Parametric
Polar
Sequence
Solve
Statistics
Turns the coordinate-display mode in Plot view on or off.
From Plot view, use the Menu mean key to toggle
coordinate display on an off.
In a program, type
1
 Coord—to turn coordinate display on (default).
0
 Coord—to turn coordinate display off.
Extremum
Function
Contains the last value found by the Extremum operation
in the Plot-FCN menu.
FastRes
Function
Solve
Toggles resolution between plotting in every other column
(faster), or plotting in every column (more detail).
From Plot Setup, choose Faster or More Detail.
or
In a program, type
1
 FastRes—for faster.
0  FastRes—for more detail (default).
HP 39gs English.book Page 32 Wednesday, December 7, 2005 11:24 PM