HP 3PAR StoreServ 7400 2-node Service Guide

Figure 14 Installing a 3.5 inch disk drive
Verifying Disk Drives
1. Verify the disk drive has been successfully replaced.
2. Display the physical disks to monitor. Open the system in the Systems tab and select Physical
Disks.
NOTE: Users can select the column header State to resort.
NOTE: Until data has been restored, the original disk drive will display as Failed and the
replacement disk drive will display as Degraded.
16 Servicing the Storage System

HP 3PAR StoreServ 7400 2-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 2-node
Category	Storage
Language	English