5. After the node has booted, verify that the node status LED is blinking green in unison with the
other node LEDs, indicating that the node has joined the cluster, then press Enter to continue.
6. Select the following:
• 1 Deconfigure <name of cluster> Node Rescue
• x to return to return to the main menu
• 7 Interactive CLI for an InServ, then select the desired system
7. Issue the following commands:
• shownode to verify that all nodes have joined the cluster.
cli% shownode
Control Data Cache
Node Name -State- Master InCluster --LED-- Mem(MB) Mem(MB) Available(%)
2 1201553-2 OK No Yes GreenBlnk 4096 12288 100
3 1201553-3 OK Yes Yes GreenBlnk 4096 12288 100
• checkhealth -svc -detail to verify that the system is healthy.
8. Click the SPMAINT menu button, then click Sign Out.
Service Processor (Physical) Node Rescue 55
To Next Page
Loading...
Need help?
General