HP 4155A - Page 11

HP 4155A/4156A Print/Plot Guide
PRINT/PLOT SETUP Page
This purpose of this eld is only to make sure specied OUTPUT
REGION is calculated correctly for desired orientation. See \GRAPH
PLOT" window.
(8) Select whether the HEADER information =
NNNNNNNNNNNNNNNNNNNN
ENABLE or
NNNNNNNNNNNNNNNNNNNNNNN
DISABLE .
(9)
Select whether COMMENTS =
NNNNNNNNNNNNNNNNNNNN
ENABLE or
NNNNNNNNNNNNNNNNNNNNNNN
DISABLE .
(10)
Select which GRAPH choices =
NNNNNNNNNNNNNNNNNNNN
ENABLE or
NNNNNNNNNNNNNNNNNNNNNNN
DISABLE .
(\||" means all choices are always enabled in PCL mode.)
(11) Optional elds for sending ESC characters to your peripheral before
sending the data.
(12) Optional elds for sending ESC characters to your peripheral after
sending the data.
Figure 1-5. PRINT/PLOT SETUP Page
1-8