HP 4934A User Manual

Index
Numerics
15 kHz Fiat Filter, 2-10
3 kHz Flat Filter, 2-10
50 kBit Filter, 2-10
A
Accessories Available, 3-9
Accessories Supplied, 3-9
Attenuation Distortion, 2-6, 2-9
B
Battery, 4-3
Battery (led), 1-2
Bridged Mode, 2-1
C
Charging (led), 1-2
C-Message Filter, 2-10
D
Dial and Hold, 2-2
Dialing Using a Butt-In, 2-3
E
Error Codes, 1-7
F
Filters
15 kHz Hat, 2-10
3 kHz Hat, 2-10
50 kBit, 2-10
C-Message, 2-10
Operational Verification, 5-6
PRGM (Program), 2-10
Frequency Shift, 2-6
Front Panel Features, 1-2,1-4
Fuse, 4-2
G
Gain Slope, 2-6
H
Hold Circuit (Operational Verification), 5-
11,5-13
Holding a Line
With a Butt-in, 2-4
Without a Butt-In, 2-4
Impulse Noise
Count (Operational Verification), 5-9
Instrument Operation, 2-18,2-20
Principles, 2-17,2-18
Setting Thresholds, 2-19
Starting/Stopping the Measurement, 2-
19
Threshold Accuracy (Performance
Test), 5-39
Timed Measurement, 2-19
With a Holding Tone, 2-18
Without a Holding Tone, 2-18
Initial inspection, 4-1
Instruments Covered by Manual, 3-7
K
Keys
BRDG, 1-2
DIAL, 1-2
DISPLAY (Impulse Noise), 1-3
DISPLAY (RCV/TRMT), 1-3
HLTER, 1-4
HOLD (RCV), 1-2
HOLD (TRMT), 1-2
LEVEL ZERO, 1-3
MEAS, 1-3
ON/STBY, 2-2
PERIOD, 1-3
RCV, 1-2
REVERSE, 1-3
SFSKIP, 1-3
START RESET, 1-4
STEP DOWN, 1-3
STEP UP, 1-3
STOP, 1-3
TRMT, 1-3
L
Level and Frequency
Instrument Operation, 2-7, 2-9
Principles, 2-5, 2-6
Line Fuse, 4-2
Loss (1004 Hz), 2-5
Loss of Holding Tone (Operational Verifi¬
cation), 5-10
M
Mating Connectors, 4-4
Measurements
Impulse Noise, 2-17,2-20
Level and Frequency, 2-5, 2-9
Message Circuit Noise, 2-10, 2-12
Noise to Ground, 2-23, 2-24
Noise with Tone, 2-13, 2-14
Notched Noise, 2-13, 2-14
P/AR (Peak to Average Ratio), 2-21, 2-
22
Signal to Noise, 2-15, 2-16
Message Circuit Noise
Accuracy (Performance Test), 5-34
Instrument Operation, 2-11
Principles, 2-10,2-11
Monitor Control, 1-4
N
Noise to Ground
Accuracy (Performance Test), 5-41
Instrument Operation, 2-24
Principles, 2-23
Noise with Tone
Instrument Operation, 2-14
Principles, 2-13
Notch Filter Rejection (Performance Test),
5-36
Notched Noise
Instrument Operation, 2-14
Principles, 2-13
O
Operational Verification, 5-3, 5-13
Options Available, 3-8
Output Level Control, 1-3
P
P/AR
Accuracy (Performance Test), 5-43
Instrument Operation, 2-22
Principles, 2-21,2-22
Performance Tests, 5-18,5-44
Power Cable, 4-3
Power Requirements, 4-2
Preparation for Use, 4-2
Preset Frequencies, 2-7
PRGM (Program) Filter, 2-10

HP 4934A Specifications

General

Brand	HP
Model	4934A
Category	Measuring Instruments
Language	English