Chapter 1 Before You Start ...
Programming Guide Contents
Programming Guide 1-11
To obtain a copy of this standard, write to:
The Institute of Electrical and Electronic Engineers Inc.
345 East 47th Street
New York, NY 10017 USA
6. The International Institute of Electrical Engineers and Electronic
Engineers, IEEE Standard 488.2-1987, IEEE Standard Codes, Formats,
Protocols, and Common Commands for Use with ANSI/IEEE Std 488.1-
1987 Programmable Instrumentation.
This standard defines the underlying message formats and data types used
in SCPI. It is intended more for firmware engineers than for instrument
users/programmers. However, it can be useful if you need to know the
precise definition of specific message formats, data type, or common
commands.
To obtain a copy of this standard, write to:
The Institute of Electrical and Electronic Engineers Inc.
345 East 47th Street
New York, NY 10017 USA
7. Hewlett-Packard Company,
BASIC 5.0/5.1 Interfacing Techniques Vol 2.,
Specific Interfaces, 1987.
This HP BASIC manual contains a good non-technical description of the
HP-IB (IEEE 488.1) interface in Chapter 12, “The HP-IB Interface.”
Subsequent revisions of HP BASIC may use a slightly different title for
this manual or chapter.
This manual is the best reference on I/O for HP BASIC programmers.
To obtain a copy of this manual, contact your nearest
Hewlett-Packard Sales office.
8. Hewlett-Packard Company, Tutorial Description of the
Hewlett-Packard Interface Bus, 1987.
To obtain a copy of this manual, contact your nearest
Hewlett-Packard Sales office.
To Next Page
Loading...
