Chapter 3 Programming Your Universal Counter for Remote Operation
Elements of SCPI Commands
Programming Guide 3-3
• Parameter Separator, Query Parameters, Suffixes pg. 3-11
• Command Terminator pg. 3-13
• Program Messages pg. 3-14
• Response Messages, Response Message Syntax pg. 3-16
Where to Find HP BASIC Programming Examples
• Easiest Way to Make a Measurement pg. 3-59
• To Make a Frequency Measurement pg. 3-62
• To Perform Limit Testing pg. 3-63
• To Measure the Statistics of 50 Measurements pg. 3-64
• To Use Limits to Filter Data Before Measuring Stats pg. 3-66
• To Read and Store Calibration Data pg. 3-68
• To To Perform a Time Interval Calibration pg. 3-69
• To Optimize Throughput pg. 3-73
• To Use Macros pg. 3-75
Where to Find QuickBASIC Programming Examples
• To Make a Frequency Measurement pg. 3-77
• To Perform Limit Testing pg. 3-78
• To Measure the Statistics of 50 Measurements pg. 3-80
• To Use Limits to Filter Data Before Measuring Stats pg. 3-82
• To Read and Store Calibration Data pg. 3-85
• To Optimize Throughput pg. 3-86
• To Use Macros pg. 3-88
Where to Find Turbo C Programming Examples
• To Make a Frequency Measurement pg. 3-91
• To Use Limits to Filter Data Before Measuring Stats pg. 3-93
• To Optimize Throughput pg. 3-96
To Next Page
Loading...
