HP 53131A/132A 225 MHz - Page 232

Chapter 4 Command Reference
Measurement Instructions (:CONFigure, :FETCh, :MEASure, :READ)
4-66 Programming Guide
Descriptions of the Measurement Functions—<function> (Cont.)
:MEASure[:SCALar][:VOLTage]:FREQuency:RATio? (Cont.)
resolution: <resolution> should use a mantissa of 1.0 and be an even
power of 10
default: value which indicates 4 digits of resolution for the
specified <expected_value>
<source_list>
range: (@1), (@2) | (@1), (@3) | (@2), (@1) | (@3), (@1)
default: (@1), (@2)
:MEASure[:SCALar][:VOLTage]:MAXimum? [(@1)|(@2)]
Measures Voltage Maximum.
<source_list>
range: (@1) | (@2)
default: (@1)
:MEASure[:SCALar][:VOLTage]:MINimum? [(@1)|(@2)]
Measures Voltage Minimum.
<source_list>
range: (@1) | (@2)
default: (@1)