Index
Index-2 Programming Guide
conformance
IEEE488.1, 3-7
IEEE488.2, 2-20, 2-21, 3-7
SCPI, 2-20, 3-7
connecting the Counter to a computer, 3-6
connector
RS-232, 4-114
D
data, measurement, 4-80
date code, firmware, 4-130
DCL, 4-31
DDE, 3-24
DDT, 4-124
decimal point, 3-11, 3-17
DEG, 3-12
Device Clear, 4-31
device trigger, 4-124
device-dependent error
definition, 5-5
device-specific error
status bit, 3-26
differences between firmware revisions, 1-3
display, 4-38
enable, 4-37
display results, 3-43
displaying errors, 5-2
double-quoted string
sending a double-quoted string, 3-58
duty cycle, 4-61, 4-89, 4-96
E
EOI, 3-13
error
command, 5-4
displaying, 5-2
execution, 5-5
how to query, 5-2
list, 5-7
messages, 5-7
query, 3-25, 4-116, 5-6
queue, 5-3
type, 5-4
errors list, 5-7
ESB, 3-22, 3-23
event enable register, 3-27, 3-29
event register, 3-27, 3-29
EXE, 3-24
execution error
definition, 5-5
status bit, 3-26
F
fail limit test, 4-14
fall time, 4-62, 4-89, 4-96
firmware
date code, 4-130
revision, 4-130
firmware revision, 2-32, 4-81
firmware revisions, 1-3, 2-31, 2-34
format
ASCII, 4-41
REAL, 4-41
frequency, 4-63, 4-85, 4-89
frequency ratio, 4-65, 4-89
front panel to SCPI command maps, 2-3
function, 4-60, 4-89
G
GET, 4-42
Getting Started, 1-6
group execute trigger, 4-42
Group Execute Trigger, GET, 4-42
H
How to Use This Guide, 1-6
HP 53131A/132A SCPI Subsystem
Commands, 2-24
HP Basic, using, 3-58
HP-IB
configuration, 3-4
operating modes, 3-4
HP-IB operating modes
Addressed (talk/listen), 3-4
Talk-only, 3-4
hysteresis, 4-81
HZ, 3-12
I
IEEE 488.2
summary list, 2-22
IEEE 488.2 Common Commands, 2-21
IEEE488.1
conformance, 3-7
obtaining copy of standard, 1-10
IEEE488.2
common commands, 2-21
conformance, 2-20, 2-21
obtaining copy of standard, 1-11
syntax, 3-8
implied channel, 3-10
in limit event status bit, 3-30, 3-31
initiate, 4-44
initiate measurements, 4-44
input
attenuation, 4-48
coupling, 4-48, 4-50
impedance, 4-49, 4-50
To Next Page
Loading...
