HP 7500 Series - CF Cards; Transceiver Modules

112
PoE-ca
p
able LPU
PoE-ca
p
able
p
orts
Com
p
atible PoE DIMM modules PoE standard
LSQ3GV48SC0
LSQ1CGV24PSC0
LSQ1GV24PSC0
LSQ1GV24PSA0
24 HP 7500 24-port PoE DIMM(JC671A) Type 1
LSQ1FV48SA0
LSQ1GV48SA0
LSQ1GV48SC0
48 HP 7500 48-port PoE DIMM(JD192B) Type 1
LSQ1GV40PSC0 40 HP 7500 48-port PoE DIMM (JD192B) Type 1
NOTE:
• Type 1—A port outputs 0 to 15.4 W of power at 44 V to 57 V, and the maximum current is 350 mA.
This type is applicable to class 0 to class 3 powered devices.
• Type 2—A port outputs 0 to 30 W of power at 50 V to 57 V, and the maximum current is 600 mA. This
type is applicable to class 0 to class 4 powered devices.
NOTE:
The LSQ1GV48SD0 and LSQ3GV48SC0 each can provide a maximum of 806 W power throu
g
h PoE.
W
hen you use the cards to power devices throu
g
h PoE, make sure the total power of PDs does not exceed
806 W.
CF cards
You can install a CF card on some MPUs (see Table 43) to expand storage space for saving files.
Table 50 CF cards available for the 7500 switches
CF card model Descri
p
tion Stora
g
e ca
p
acit
y
CF-256M-I HP 7500 256M Compact Flash Card(JC686A) 256 MB
CF-512M HP 7500 512M Compact Flash Card(JC685A) 512 MB
CF-1G HP 7500 1G Compact Flash Card(JC684A) 1 GB
Transceiver modules
This section describes the following transceiver modules:
• CFP transceiver modules (Table 51)
• QSFP+ tr
ansceiver modules (Table 52)
• QSFP+ ca
bles (Table 53)
• QSFP+ to SFP+ c
ables (Table 54)
• 1
0-Gigabit XFP transceiver modules (Table 55)
• 1
0-Gigabit SFP+ transceiver modules (Table 56)
• 1
0-Gigabit SFP+ cables (Table 57)