DEVICE_NAME Card model
DEVICE_SERIAL_NUMBER Card serial number
MAC_ADDRESS
MAC address of the card.
• An MPU has a MAC address.
• An LPU has no MAC address (the field is NONE).
MANUFACTURING_DATE Manufacturing date of the card
VENDOR_NAME Vendor name of the card
The operation is not supported on
the specified board or subslot
The card is a virtual LPU and does not support the display device manuinfo
command.
Displaying card CPU usage statistics
Use the display cpu-usage command to display card CPU usage statistics:
<Sysname> display cpu-usage
Slot 0 CPU usage:
2% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Slot 1 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Slot 2 CPU usage:
3% in last 5 seconds
2% in last 1 minute
2% in last 5 minutes
Slot 4 CPU usage:
2% in last 5 seconds
2% in last 1 minute
2% in last 5 minutes
Slot 5 CPU usage:
3% in last 5 seconds
2% in last 1 minute
2% in last 5 minutes
Slot 6 CPU usage:
2% in last 5 seconds
2% in last 1 minute
2% in last 5 minutes
To Next Page
Loading...
