HP 7500 Series - Displaying Detailed Information about a Card

58
multiple modules. Executing the display diagnostic-information command is equivalent to executing the
display clock, display version, display device, and display current-configuration commands in turn.
• Save running status data for multiple feature modules.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save succeeded.
To view the content of file aa.diag, execute the more.aa.diag command in user view, in
combination of the Page Up and Page Down keys.
• Display running status data for multiple feature modules. (The output depends on your device
model.)
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/15/2010
===================================================
===============display version===============
===================================================
…Omitted…
Displaying detailed information about a card
• Use the display device verbose command to display detailed information about all cards in the
switch.
<Sysname> display device verbose
Slot No. Brd Type Brd Status Subslot Num Sft Ver Patch Ver
0 LSQ1SRP2XB Master 0 7500-6620 None
1 LSQ1SRP2XB Slave 0 7500-6620 None
2 LSQ1GV48SA Normal 0 7500-6620 None
3 NONE Absent 0 NONE None
4 LSQ1FV48SA Normal 0 7500-6620 None
5 SRP2XBSLAVE Normal 0 7500-6620 None
6 SRP2XBSLAVE Normal 0 7500-6620 None
Slot 0 info:
Status : Master
Type : LSQ1SRP2XB
Software Ver : 7500-6620
PCB 1 Ver : VER.B
PCB 2 Ver : VER.B
FPGA Ver : 001
BootRom Ver : 301
CPLD 1 Ver : 006