Status:
Operating status of the CF card:
• Absent—No CF card is in the slot.
• Fault—The CF card is faulty.
• Normal—The CF card is correctly operating.
Size: Memory size of the CF card
Displaying the operating status of the fan assembly
Use the display fan command to display the operating status of the fan assembly:
<Sysname> display fan
Fan 1 State: Normal
Table 20 Command output
Field Remarks
Fan 1 Fan assembly number
State
Fan assembly status:
• Normal—The fan assembly is correctly operating.
• Absent—The fan assembly is absent.
• Fault—The fan assembly has failed.
Displaying the operating status of power supplies
Use the display power command to display the operating status of power supplies:
<Sysname> display power
Power 1 State: Normal
Power 2 State: Absent
Table 21 Command output
Field Descri
Power 1 Power supply number
State
Power supply status:
• Normal—The power supply is correctly operating.
• Absent—The power supply is absent.
• Fault—The power supply has failed.
Configuring the temperature thresholds for a card
The switch sends traps when the temperature of a card crosses the lower or upper temperature threshold.
You can change the temperature threshold settings for a card as needed so you can remove the alarm
condition in time.
To configure and display the temperature thresholds for a card:
To Next Page
Loading...
