60
Learning Mode: IVL
Slot 6 info:
Status : Normal
Type : SRP2XBSLAVE
Software Ver : 7500-6620
PCB 1 Ver : VER.0
FPGA Ver : 001
BootRom Ver : 205
CPLD 1 Ver : 006
Chip : 0
Learning Mode: IVL
• Use the display device slot slot-number command to display detailed information about a card.
<Sysname> display device slot 0
Slot 0 info:
Status : Master
Type : LSQ1SRP2XB
Software Ver : 7500-6620
PCB 1 Ver : VER.B
PCB 2 Ver : VER.B
FPGA Ver : 001
BootRom Ver : 301
CPLD 1 Ver : 006
CPLD 2 Ver : 006
Table 15 Command output
Field Descri
Slot No. Slot number of the card
Brd Type/Type Card model. If this field is NONE, no card is in the slot.
Brd Status/Status
Running status of the card:
• Master—The card is an active MPU.
• Slave—The card is a standby MPU.
• Absent—No card is in the slot.
• Fault—The card is booting or the card has failed.
• Normal—The card is an LPU that is correctly operating.
Subslot Num The maximum number of sub-cards supported by the card.
Sft Ver/ Software Ver Software version of the card
Patch Ver Patch version of the card. If this field is NONE, no patch is installed on the card.
PCB 1 Ver Version of PCB 1 on the card
FPGA Ver FPGA version of the card
BootRom Ver Boot ROM version of the card
CPLD 1 Ver Version of CPLD 1 on the card
Chip Chip number of the card
To Next Page
Loading...
