HP 7500 Series - Page 79

73
Task Command
Remarks
Schedule a reboot of the switch at
a specific date and time
schedule reboot at hh:mm
[ date ]
By default, no reboot schedules are set.
Available in user view.
Schedule a reboot of the switch
after a specific amount of time
schedule reboot delay
{ hh:mm | mm }
By default, no reboot schedules are set.
Available in user view.
NOTE:
• To reboot the switch or the active MPU by using the reboot command, you must ensure that you have
specified a main boot file.
• The switch prompts "REBOOT IN ONE MINUTE" one minute before the rebootin
g
time and then reboots
in one minute.
• For data security, the switch does not run a scheduled reboot task if you are performin
g
a file operation
at the scheduled reboot time.