HP 870 - Page 34

For example, the software loading failures might occur in the following situations:
•
When you use XMODEM to load software, you select a baud rate other than 9600 bps, but you
have not reset the baud rate for the HyperTerminal.
•
When you use TFTP to load software, you entered an incorrect IP address, software name, or TFTP
serve path.
•
When you use FTP to load software, you entered an incorrect IP address, software name, username,
or password.
If software loading has failed even if the physical connections are in good condition and the software
loading process does not have any input errors, contact HP Support.
30