HP 8711C User Manual

I
-
Automating Measurements
Configuring Your Test System
Stand-Alone Network
In this conEguration, the measurement is controlled directly by the operator,
Analyzers
with very little automation. No computer or BASIC control is used,
however the fast recall feature may be used for quickly changing to different
instrument states. This conEguration is well suited for simple go/no-go device
testing using the built-in limit testing features. Configure your system as a
stand-alone analyzer if you would like to:
l Simplify test system configuration
l Reduce capital expense
l Allow for future expansion with minimal effort
l Minimize the space required for a system
Figure 7-l shows a stand-alone network analyzer.
NETWORK ANALYZER
_I
Figure 7-1. Stand-Alone Network Analyzer
7-6
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com

HP 8711C Specifications

General

Brand	HP
Model	8711C
Category	Measuring Instruments
Language	English